KALMETALL®-W hard overlay welded steel linings from Abresist Kalenborn provide cost-effective impact, high temperature and abrasion resistant protection. The pre-engineered linings can be installed into existing steel structures or designed as a low weight, self-supporting structure. Designed for specific applications, KALMETALL®-W linings are ideal for use in bunkers, mills, chutes, dust pipes, separators, screens, fan linings and blades, cyclones, and others.

KALMETALL®-W combines a strong steel base composed of ASTM A-36 carbon steel or alloy plates with a hard overlay welded chromium carbide protective layer. The steel base ranges in thickness from 3/16” (4.8 mm) to ¼” (6.3 mm) with other sizes available. Standard KALMETALL®-W alloy plates measure 48” x 96” (1219 x 2438 mm) and 60” x 120” (1524 x 3048 mm).

The wear protective layer on KALMETALL®-W is an integral part of the structure and is composed of a C-Cr-Fe system with primary chromium carbides. The wear protective layer is available in a variety of different qualities, thickness, and dimensions.

Various fastening systems are used with KALMETALL®-W linings. They include plug welding, rear welding to the basic body, stud welding of screw-type fasteners, counter sunk rings, and suspended systems. Customized components are a specialty.

For more information, contact Abresist Corp., 5541 North State Road 13, Urbana, IN 46990. Telephone: 800-348-0717 or fax: 888-348-0717.