• Impact resistant components.
• Hard and wear resistant surface.
• Impact resistant assemblies with a customized rubber layer as well as optimal vulcanization of the system designed for specific conditions.
• Simple and reliable mechanical attachment.
• Can be glued in place when steel backing plate is not used.
• Elements easily replaceable.
• Good sound insulation and reduction.
• Optimal adaptation to the specific requirements thanks to varying sizes, thickness and design.
• Standard sizes include: 24” x 12”, 20” x 20”, 12” x 12” and 6” x 6”.  Custom sizes also available.

KERAFLEX wear protection systems are a combination of ALRESIST® high alumina ceramics or KALMETALL®-W hard overlay welded plates vulcanized in rubber mats.  Mechanically attached to a steel structure using studs or bolts, the composite lining has a maximum application temperature of 80°C /176°F.

ALRESIST High Alumina Ceramics and KALMETALL-W Hard Overlay Welding

ALRESIST High Alumina Ceramics.		KERAFLEX installed at a ship unloading facility handling taconite.
Wear Protection System Options:
KERAFLEX-KRM The system consists of ALRESIST high alumina ceramics, rubber and steel that are vulcanized into a single assembly. The elements are mechanically attached to the subsurface by bolts or threaded studs on the back. The bolt system can also be used with KERAFLEX-WRM and KERAFLEX-RM. KERAFLEX-KR The system consists of a combination of ALRESIST high alumina ceramics and rubber. The elements are flexible and can be matched to surfaces of varying geometry. KERAFLEX-KR is normally glued in place. Different types of adhesive are available for that purpose. KERAFLEX-WRM The KERAFLEX-WRM system consists of KALMETALL-W, rubber and a steel backing plate. The system is vulcanized into a single assembly. KERAFLEX-RM KERAFLEX-RM is a system made up of rubber and steel vulcanized together. It can be bolted or glued into place.