Kalenborn Francais
Abresist Corporation, a Kalenborn Company, offers wear resistant linings for wear and abrasion protection in various industries.
Home > Products > KALOCER® Linings
KALOCER® Linings (formerly Alresist)

Abrasion and Temperature Resistant High Alumina Ceramic Linings



ALRESIST High Alumina Ceramics for hydraulic and pneumatic system componenet exposed to extreme wear.
  • Use where equipment tolerances or weight
    restrictions allow only a thin wear resistant lining.
  • Configurations in thickness as low as 1 mm (0.04 in).
  • Outlasts other products up to ten times.
  • FDA approved.
  • Multiple attachment methods, such as
    welding and adhesives.
    Protects high speed moving parts: impellers,
    fan blades, mixer plows, augers, screw flightings, conveyor screws, and more.
  • Effectively handles severe abrasion in elbows with tight radii.
  • Specify for existing systems or original equipment.
  • Custom engineered for specific applications.
  • Watch the video

KALOCER® high density alumina ceramic linings and abrasion resistant tiles prevent destructive wear in conveying, processing, and storage equipment. Made from high purity, fine grain, alpha aluminum oxide, a material almost diamond hard, KALOCER® thin wear resistant linings can be formed in a variety of pre-engineered standard and custom sizes and shapes.

Installation: pipes, shaped components, or thin tiles laid in epoxy, RTV or welded attachment. KALOCER® tiles vulcanized into rubber mats for installation by gluing are available.

Application temperature: up to 1000°C / 1832°F depending on application and geometry.

Advantages: highly wear resistant, smooth surface that lasts, no corrosion,
available from 1.5 mm thickness.

ALRESIST® alumina ceramic linings and abrasion resistant tiles for hydraulic and pneumatic system components exposed to extreme wear. Abresist Wear Resistant Fused Cast Basalt Linings is a mineral based wear protection material for plant components when the conveying material produces friction induced abrasion.
KALOCER® piping elements from Abresist Kalenborn can be placed with high performance adhesive. Weld-on KALOCER® high alumina ceramic tiles protect this cone against wear and thermal shock.

 

Abresist Kalenborn also recommends these other wear resistant linings:

 

Back to top

Home
| Products | Services | Applications | Industries | Case Histories
Literature | Videos | News | Company History | Contact Us | Rep. Log-In | Site Map

1-800-348-0717    
info@abresist.com
Copyright 2013 Abresist Kalenborn Corporation. All rights reserved.