Different materials from the wear protection program for special applications or conditions include:

• ABRESIST®
• KALCOR®
• ALRESIST®
• KALSICA®
• KALMETALL®
• KALCRET®

High conveying speeds and abrasive materials cause wear in material handling systems. However, the wear is of varying intensity in different areas. This is where a combination of the different wear resistant linings proves successful.

Mineral and ceramic linings are very effective against sliding abrasion. Metallic linings provide additional protection against impact.

Designed on the basis of prior successful experience, components can achieve similar lifetimes without some failing prematurely or others excessively protected.

Expansion pot with 30 mm thick ABRESIST tile to protect the cone. The outer wall is lined with 15 mm thick ALRESIST tile.	Combined lining with ABRESIST and ALRESIST® tile.

Abresist also recommends these other wear resistant linings:

ABRESIST® Fused Cast Basalt ALRESIST® High Alumina Ceramics KALCOR® Zirconium Corundum KALSICA® Silicon Carbide Ceramics KALMETALL® C Hard Castings KALMETALL TC Tungsten Carbide KALMETALL® W Hard Overlay Welding KALFLEX Flexible Wear Protection KALCRET® Hard Compound KALBOND Bonding System for ALRESIST Protective Linings ALRESIST® TWC Troweable Epoxy Repair Compound