Abrasion and Temperature Resistant High Alumina Ceramics

Use where equipment tolerances or weight restrictions allow only a thin wear resistant lining. Configurations in thickness as low as 1 mm (0.04 in). Outlasts other products up to ten times. FDA approved. Multiple attachment methods, such as welding and adhesives. Protects high speed moving parts: impellers, fan blades, mixer plows, augers, screw flightings, conveyor screws, and more. Effectively handles severe abrasion in elbows with tight radii. Specify for existing systems or original equipment. Custom engineered for specific applications.

ALRESIST® high density alumina ceramic linings and tiles prevent
destructive wear in conveying, processing, and storage equipment. Made from high purity, fine grain, alpha aluminum oxide, a material almost diamond hard, ALRESIST can be formed in a variety of pre-engineered standard and custom sizes and shapes.

Installation: pipes, shaped components, or thin tiles laid in epoxy, RTV or welded attachment. ALRESIST® tiles vulcanized into rubber mats for installation by gluing are available.

Application temperature: up to 1000°C / 1832°F depending on application and geometry.

Advantages: highly wear resistant, smooth surface that lasts, no corrosion,
available from 1.5 mm thickness.

ALRESIST® piping elements from Abresist can be placed with high performance adhesive.	Weld-on ALRESIST® high alumina ceramic tiles protect this cone against wear and thermal shock.

Abresist also recommends these other wear resistant linings:

ABRESIST® Fused Cast Basalt KALCOR® Zirconium Corundum KALSICA® Silicon Carbide Ceramics KALMETALL® C Hard Castings KALMETALL TC Tungsten Carbide KALMETALL® W Hard Overlay Welding KALFLEX Flexible Wear Protection KALCRET® Hard Compound KALBOND Bonding System for ALRESIST Protective Linings ALRESIST® TWC Troweable Epoxy Repair Compound